Stainless Steel Wire Mesh Belt Cleaning Method

Stainless Steel Wire Mesh Belt Cleaning Method

Cleaning methods of Stainless Steel Wire mesh belt:

1. The touch method The method uses hydrogen sulfide and sulfur dioxide as the material, and separates H2S and SO2 from the reaction device with an acidic medium to make a touch response. The product of the reaction is a mixture of soluble sulfur and insoluble sulfur. The mixture is washed, dried, broken, extracted, etc. to obtain insoluble sulfur products.
2, gasification method Gasification method, also known as high-temperature method, is to dry the sulphur melt and intermittently heat up to 500 ~ 700 °C occurs superheated steam, and then relying on its own pressure high-speed jet into the quench liquid agile cooling, insoluble sulfur and A soluble mixture of soluble sulfur, where the IS mass fraction can exceed 50%. After it is solidified, it is extracted with CS2 solvent and separated, washed and dried to obtain a high content of insoluble sulfur commodity. Later, the original technology was continuously improved, and a certain amount of H2S was injected during the reverberation process to reduce the viscosity of the material in the production process, and then the stability of the insoluble sulfur commodity was improved; the quenching and dehydration of the incinerator were eliminated. The film, as well as the boring and destruction of many links, “one-step method” directly produces high levels of insoluble sulfur products, simplifies the production technology, and reduces production costs.
3, Stainless Steel Mesh belt clean melting method Melting method, also known as low temperature method, is to melt the sulfur at 130 ~ 150 °C, increase the amount of stabilizer, and then the mixture temperature to 180 ~ 210 °C. Instinct at the time of mixing to maximize the conversion of soluble sulfur to insoluble sulfur