Stainless steel mesh belt conveyor specification

Stainless Steel Mesh belt conveyor specification

When the stainless steel mesh belt is used in the conveyor, it is necessary to pay attention to the specification:

(1) The tension of the stainless steel mesh belt should not be too large in use, and it should be guaranteed to work under the minimum initial tension on the premise that the transmission gear does not slip and the receiving point does not excessively sag.

(2) Stainless steel mesh belts of different types and different specifications shall not be connected together in the same machine.

(3) Generally, the conveyor is required to be operated to avoid overloading of the motor and slipping of the stainless steel mesh belt; except for special circumstances before the shutdown, the materials on the stainless steel mesh belt should be completely discharged.

(4) The order of starting is to open the last conveyor (unloading stainless steel mesh belt), then open in order, and finally open the receiving conveyor. The stopping sequence is opposite to the starting sequence.

Got free sample and quotation: email- caroline@scwiremesh.com