Introduction of the filter cloth filter mesh

May 13, 2019

With the further acceleration of the industrial Filter Mesh process, we are now getting closer and closer to various general-purpose equipment such as filter mesh presses. Now we will introduce the filter cloth mesh of the van filter press.

As we all know, the normal operation of the filter press requires a variety of filter cloths to assist, and the filter cloth selection is directly related to the working quality of the filter press, which directly affects the filter separation effect of the filter press. Because the filter cloth is the main interceptor for separating the solids in the separation mixture from the filter press equipment. Just like using a fine sieve to drain sand, whether the sand passes through the fine sieve depends on the size of the pore size of the fine sieve. Only the sand smaller than the pore size can pass through the fine sieve. Therefore, the filter cloth of the filter press has the same data, that is, the mesh number of the filter cloth.

The filter cloth mesh indicates the density of the pores of the filter cloth, and the "mesh" is the number of holes on the filter cloth per square inch (1 square inch = 2.54 square centimeters), such as the filter cloth of 1 mesh. There are 10 holes in inches, which is equivalent to a hole size of 1651 μm (1 cm = 1000 μm). The main selection of the filter cloth filter cloth mesh is that the larger the mesh number, the better, because the larger the mesh size, the smaller the pore size, the lower the filtration efficiency, and the lower the filtration speed.

Attachment: Comparison table of filter cloth number and aperture diameter commonly used in China

Number of mesh	Aperture μm	Number of mesh	Aperture μm	Number of mesh	Aperture μm
2.5	7925	12	1397	425	33
3	5880	16	990	500	25
4	4599	20	833	625	20
6	3327	40	350	800	15
7	2794	60	245	1250	10
8	2362	200	74	2500	5
10	1651	350	53	12500	1

The above is the Introduction of the filter cloth filter mesh we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Stainless steel mesh belt manufacturing process and steps

Next:The use of welded wire mesh

Most Popular